cybervision64 video in cable

[InTheSand]

Hi,

On my A3000, its video output is connected to the Cybervision 64's video input via a standard VGA cable (15-pin male D-sub at each end).

Since the A4000 doesn't have a 15-pin output, you'll need a 23-pin to 15-pin converter (such as this), plus a 15-pin male to 15-pin male VGA lead available from any electronics store.

Note that unless you have a multi-sync monitor, the 15KHz Amiga modes will not be displayed as the CV64 doesn't have a scan-doubler.

 - Ali

[InTheSand]

djkoelkast wrote:
an Amiga > VGA adapter would do I guess, but is there a possibility to find it any cheaper than 20 euro's?

Probably not too likely as those 23-pin D-plugs are very difficult to find these days.

You could try eBay and get one second-hand...

 - Ali