Welcome, Guest. Please login or register.

Author Topic: What's the best way to upgrade OS 3.0 to 3.1 and retain current settings?  (Read 2843 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline InTheSandTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 1766
    • Show all replies
    • http://www.ali.geek.nz
Hi,

I've had an A1200 for over ten years and have been happy enough with it sat on OS 3.0. However, I recently bought a Subway USB controller for it (thanks AmigaKit.com - great service!) and also Kickstart 3.1 and a new set of OS disks as this was listed as a requirement.

I've installed the USB controller and the new ROMs and all is OK, with the Amiga booting up properly, etc.

However, what would be the best way for me to install OS 3.1 over my existing 3.0 installation whilst preserving all my settings? I'm quite happy with the way I've got everything set up and don't really want to install again from scratch!

Any advice appreciated!

 - Ali
 

Offline InTheSandTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 1766
    • Show all replies
    • http://www.ali.geek.nz
Re: What's the best way to upgrade OS 3.0 to 3.1 and retain current settings?
« Reply #1 on: February 03, 2005, 07:41:32 PM »
Cool! Thanks for all your comments!

It's been a long time since I've installed an Amiga OS, and I've done it from scratch previously.

Regards,

 - Ali
 

Offline InTheSandTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 1766
    • Show all replies
    • http://www.ali.geek.nz
Re: What's the best way to upgrade OS 3.0 to 3.1 and retain current settings?
« Reply #2 on: February 04, 2005, 06:39:50 PM »
Hi,

Yahoo... I'm now on OS3.1! The installer unfortunately replaced setpatch with an older version than the one previously installed, and it also replaced the 68040.library, causing my 68060 to choke on startup - but I've sorted both of those now.

Very pleased with the Subway... My A1200 now has an SD/CF combo flash card reader attached and this is MUCH faster than my previous parallel port and joystick port Zip drive bodge!

In people's opinion on here, would it be worth the bother of me upgrading to OS3.5 or 3.9? Although I have the 68060, I don't have a graphics card and for networking, my installation of AmiTCP and the cnet.device works OK. Are there any real benefits for a relatively unexpanded system other than slightly more up to date software?

Regards,

 - Ali
 

Offline InTheSandTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 1766
    • Show all replies
    • http://www.ali.geek.nz
Re: What's the best way to upgrade OS 3.0 to 3.1 and retain current settings?
« Reply #3 on: February 05, 2005, 10:25:25 AM »
Hi,

OK... I'm considering this...

One question: does it have to be installed directly from the CD? Or would it still work if I copied the CD's contents on to an SD or CF card and installed from there?

Although I have a Squirrel SCSI interface, the CD drive I was using with it has long since died, so I use a PC as an intermediate step for most stuff.

Regards,

 - Ali
 

Offline InTheSandTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 1766
    • Show all replies
    • http://www.ali.geek.nz
Re: What's the best way to upgrade OS 3.0 to 3.1 and retain current settings?
« Reply #4 on: February 05, 2005, 01:54:58 PM »
OK, thanks for the info.

Looks like I'll be making another purchase soon then!

 - Ali
 

Offline InTheSandTopic starter

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 1766
    • Show all replies
    • http://www.ali.geek.nz
Re: What's the best way to upgrade OS 3.0 to 3.1 and retain current settings?
« Reply #5 on: February 08, 2005, 06:48:44 PM »
OK... cool!

Oh well... After much deliberation, I've placed an order for OS3.9!

Go AmigaKit.com! Hope your delivery is as speedy as the last one!

 - Ali