Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Amiga 3000 boot problem.  (Read 1362 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline toples50Topic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 47
    • Show all replies
Amiga 3000 boot problem.
« on: January 15, 2018, 08:21:22 AM »
I have an A3000 (serial number 001205 -is it an old A3000?).
Until yesterday boots normally.From today does not boot and goes to a menu which I have to choose to boot from 1.3 disk or 2.0 disk.
The machine has 3.0 roms I think because has 3.0 Workbench.
Also can I use any SCSI hard drive in the A3000?
« Last Edit: January 15, 2018, 08:26:08 AM by toples50 »
Logged
 

Offline toples50Topic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 47
    • Show all replies
Re: Amiga 3000 boot problem.
« Reply #1 on: January 15, 2018, 12:22:57 PM »
I have a scsi Quantum HD.Until yesterday boots normally.From today stop to boot.Instead it shows me to select Kickstart screen.My A3000 is rev 6.1
Can I install 3.1 roms?
Logged
 

Offline toples50Topic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 47
    • Show all replies
Re: Amiga 3000 boot problem.
« Reply #2 on: January 16, 2018, 04:32:33 PM »
A3000 takes 50 pin internal SCSI drive?I have checked the ribbons and cables but nothing yet.
Logged
 

Offline toples50Topic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 47
    • Show all replies
Re: Amiga 3000 boot problem.
« Reply #3 on: January 17, 2018, 08:23:59 PM »
I posted the picture from the boot screen of my A3000.I think the HD is dead.I don't have any disks from the A3000.Can I replace the 2.1 roms with 3.1 and boot normally?
Logged
 
Pages: [1]   Go Up
« previous next »