Any Hivelytracker users out there? (OS 3.x, Paula)

[xeron]

I've appeared, but I don't know what to say... I only use the OS4 version, too. Buzz is responsible for the os3.x and aros ports...

Do other AHI programs work? Does "Unit 0" make a noise when you do the test sound in AHI prefs?

Edit: BTW, if you DO ask on the hivelytracker forum, syphus should see it and he uses hively on a1200/paula/os3.x.

[xeron]

@Colani1200

"Unit 0" is what hivelytracker uses to play sounds through AHI. If Unit 0 isn't working, hivelytracker won't work. When you go into AHI prefs, select unit 0 from the cycle gadget and click "Test Sound". If you get a sound, then AHI is correctly installed and at least configured well enough to get sound out of it, and so the problem is with hivelytracker.

If you don't get a sound, or you get an error, the problem is with your AHI installation.

BTW: 68030 is too slow to usefully use hivelytracker. A future version may include a 68k assembler optimised replayer which would help, but until then you really need an 060.

[xeron]

Probably :-)

Hively was written specifically for PPC/OS4, so its all written in C and not optimised for paula playback (unlike the original AHX).