Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A590 power connector  (Read 1558 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline taononstopTopic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 12
    • Show all replies
    • http://www.taononstop.com
A590 power connector
« on: November 17, 2004, 08:35:06 AM »
helllllo,

I took my A500+ out of storage and I noticed that the connector on the power supply for the A590 has been broken off. Now I want to solder it back on and I found the 4pin layout but I am not that technical. Can anyone simply tell me which color I solder to what pin on the connector??
It would be very appreciated....

Joris
Logged
 

Offline taononstopTopic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 12
    • Show all replies
    • http://www.taononstop.com
Re: A590 power connector
« Reply #1 on: November 17, 2004, 09:01:49 AM »
I am talking about the connector that goes INTO the hard drive unit. If I remember well, it has a yellow, red, black and black/white cable.....

THANKS for the fast reply already!
Joris
Logged
 

Offline taononstopTopic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 12
    • Show all replies
    • http://www.taononstop.com
Re: A590 power connector
« Reply #2 on: November 17, 2004, 05:11:33 PM »
in fact, I have a RED, a YELLOW, a GREY and a blackcable connected to a white one.

when looking UPON the pins in the connector (that goes into the hard drive), which one do I solder where please?
Logged
 

Offline taononstopTopic starter

  • Newbie
  • *
  • Join Date: Nov 2004
  • Posts: 12
    • Show all replies
    • http://www.taononstop.com
Re: A590 power connector
« Reply #3 on: November 17, 2004, 05:32:06 PM »
OK, I got a red power light on the hard disk with nothing else blinking.

How do I get the A500+ to recognise it and start from it?
Logged
 
Pages: [1]   Go Up
« previous next »