I have now an HD but I cannot find out how to use it.
Some config info:
* card ID0
* HD ID1
* CD-ROM ID2 - terminated
Looks good. The card is probably at ID7 though, not 0. (default=7)
The GVP utils see the HD but I cannot use it.
Some questions:
* a small descriptions of the Guru ROMs...?
GVP Utils sees it? Are you really sure it has a GURU rom?
* which is the device name? omniscsi.device? gvpscsi.device?
omniscsi.device is if it does have a guru rom, gvpscsi.device if it doesn't.
* can I use the HDToolBox to config the HD?
* usual way (HDToolBox [device] from CLI)?
Yes, sure you can. Click on HDToolbox, right mouse button, in menu go to Information and add/edit the tooltype SCSI_DEVICE_NAME=omniscsi.device (or gvpscsi.device)
HDToolbox should now find your devices.
* have I to term the external SCSI port of the card?
Not if there is nothing connected. If there is the last device should be terminated.
* When I put a jumper in the J4 the computer don't do anything... J4 is the autoboot jumper, right?
J4 is autoboot. You mean it doesn't boot from HD, or does it hang completely?
