A1200 LEDs schematics

[Zac67]

You mean this?



It's not the PCB but apparently it just carries the LEDs.

[Zac67]

What do you neec Vcc for? The LEDs just sit between their signal and GND. Oh well, on second look, you might need resistors in series with the LEDs or they'll burn. Not sure though, depends on the transistor types.

[Zac67]

The 100 Ohms is a bypass for the transistor, so the LED will stay dim and won't go completely dark when _LED is high.

Dunno where the _CC_ENA is coming from. Can you find its origin?

PS: 1000th post! Woohoo! :banana:

[Zac67]

Cool! In C='s place I would've combined that signal with _IDE_LED, so the HDD LED would flash no matter what is accessed. Cheaper still. :-D

Could make an easy mod to get that though... :roll:

[Zac67]

Don't forget to adjust the Floppy LED's resistor - only one instead of two LEDs in line.

AFAIR the LEDs, you could even saw the LED in two halves, fill in the gap with some white plastic and with the trace reroute you'd have two independent lights.