Cybervision 64 3D and Spectrum problem

[machinehead]

Happy Holidays all!
I have an A3000 with a 3640 accelerator. I installed a Cybervision card and the driver software, and am having a strange problem.
The 3000 will boot and will run the shell and multiview with no problems. But from the workbench when I click a drive or an icon,  it locks up.
It does not do this in native modes.
What am I doing wrong?

[machinehead]

I am running 3.9.  I also upgraded to Ramsey 7 and Buster 11. As per the instructions but I couldn't find a DMAC 04.
So I'm still running a DMAC 02. The 3640 runs great with the 02.
The machine has 3.1 roms, Kickstart 45.47

My 3000 came with 2 floppies. But I removed the one on the right to hack a hole in the drive tray so my CPU fan could stick through!

I am going to make the next meeting if I have to use a vacation day to do it!
However, I am grateful to have a job!

[machinehead]

This is a Spectrum 28/24 card. For some reason I thought it was a Cypervision.
So, this is not a Cybervision card at all (Duh...)
But I still have the same problem.
Dave

[machinehead]

Did some research and found that the Spectrum may not work with Buster 11.
I have reinstalled Buster 7 and will try again tomorrow. I may be able to help someone else out if this is the fix!

[machinehead]

CyberGraphX V 2.16 (1995) I think I need a newer version to work with 3.1 roms?