dce ppc help

[webhead]

hi i just got a dce 68060 240mhz ppc card stuck it in ,nice black screen and fan dont spin great.

is there anything i can do to test this board out and try and get it working ,would the card still run with no memory in it just to see if its memory /
ohh well is there anything i got to do before boot up?

thanks in advance.

[webhead]

hi everyone thanks for the help i installed disk without card in,then i put memory in and it flickers the screen like its going to boot but then flickers stop and dont boot maybe the ppc is getting to hot?
and there is to memory slots 1 that sits the card at an angle and 1 that sits flat which 1 do i put it in.

and is there a bypass button on keyboard just to see if that works or any other keys i can use has it got a bios.

i will now try and slam it in place see if that works gulp

it says on the board blizzard ppc 2000 dce?
many thanks keep them ideas coming ifi exhaust them then i will sed it to france to get it fixed i hope it dont come to that though lol.

[webhead]

nope she still not doing bugger all anyone got any ideas pleeeeeeeeeeeeeeeeeeeeeeeeaaaaaaaaaasssssssssssssssssssssssssssssseeeeeeeeeeeeeeeeeeeeeeeeeeeee

[webhead]

hi yes i got a micronik infiniti 4 tower thing.

are these power supplys any good i dont think its atx it has its own weird connector.has it got enough power for the card to run i only got ppc card and a powerflyer ide.

i have nothing else in it apart from hd,cdrom.

i dont know its a weird 1.

[webhead]

hi everyone whilst i have had no success with the 060 board i decided to upgrade my ppc 040 board to the 060 cip it now works as an 060 ppc cool or what take ages desoldering the 040 chip but not loang to install the 060 socket im happy to report the upgrade from 040 to 060 is possible with ease it shes fast as hell now so i did et my 060 in the end cheers.

[webhead]

hi thanks for that but i swapped my 060 over to my 040 ppc card,all works noe no i have throen my dce board in the bin.

it was real easy job but time consuming ,so i have me 060 working lovly now ,it seems to me the boards are the same for the 040 and the 060 or why would they have the jumper settings on so you can change it all over???