Welcome, Guest. Please login or register.

Author Topic: relaycard for amiga  (Read 3665 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiga4001Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 537
    • Show all replies
relaycard for amiga
« on: October 20, 2009, 10:26:48 PM »
I want to control a swimmingpool pump which pumps the water through some piping on the roof which heats the water in the pool.
Idea was to use an amiga500 or 1200 with a relaycard.
Can I use all parallelrelay cards for this?
Which software is best to control this..
Was thinking about C64 to do the control as it is easier to program in basic...If I remember all commando's.
But This has no RTC so makes it difficult to make a timescheme.
Is it also possible to have a input to the amiga?
Like a tempsensor saying Yes 30 degrees so pump on..
 

Offline amiga4001Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 537
    • Show all replies
Re: relaycard for amiga
« Reply #1 on: October 21, 2009, 06:40:44 AM »
Ok this t.u.r.d can it do the job?I mean with timing on rtc handle inputs to deliver action.
Can't try it now no amiga here only pegasos.
Can anybody recommend a type of parallel relaycard?
 

Offline amiga4001Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 537
    • Show all replies
Re: relaycard for amiga
« Reply #2 on: October 26, 2009, 08:16:15 PM »
I want to give turd a go,reasons: low budget realycard available software nice with a gui with all my needs.
Only no input but maybe I'll find another hardwareproject for input through another port.
But has anybody been able to register t.u.r.d lately?
The weblink is dead and I get no response from my email to his adress.
I want to buy a key from him.
 

Offline amiga4001Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 537
    • Show all replies
Re: relaycard for amiga
« Reply #3 on: October 27, 2009, 06:45:50 AM »
I found one on conrad.ml it's productno:130217-89 priced at 30 euro so about the same..it's a kit though.
Didn't search for the inputproblem yet.
Maybe through the joystick connector?
Does anybody know if the non registered version off t.u.r.d. is limited in some way?
Can't reach the programmer it seems.
Or maybe somebody wants to sell me the complete program registered and all?
Anybody can recommened a type off amiga to play with the relaycard?
Was thinking about a amiga1200 and a small ps2 screen.
 

Offline amiga4001Topic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 537
    • Show all replies
Re: relaycard for amiga
« Reply #4 on: October 28, 2009, 05:53:32 PM »
Yes turd has a arexx port.
Indeed it is conrad.nl sorry.