A4000 freeze, what SCSI settings do you have in CSPPC for an ACARD 7720UW device?

[keropi]

I was wondering what settings to use, right now all is set to auto, but it does not feel too fast, plus doing a SYSINFO DH0 speedtest, it gives 6.5MB/sec... doing a second leads to a reboot...
I have connected to the Acard 7720UW an 80GB WesternDigital IDE drive , acard had termination disabled and I use 2 LVD/SE terminators....
below is a pic, with the CSPPC settings and the different that UNITCONTROL shows... ?  also SCSICONFIG complains that the  Cyclinder*Heads*Blocks spans more sector than the HD really has
I use the SCSI files found on the Unofficial PowerUp support site... something is terribly wrong, right?

[keropi]

so why the freeze on syspeed???
also, it is IMPOSSIBLE to fit inside the 4000D case the 3,5" HD, do u think that a 2,5" HD converted to 3.5" will work???

ALSO, another dissapointing thing is that even though on the csppc menu I have enabled SCSI Patch, there is still a delay in boot...! I have also disabled all scsi devs except the HD and the CD , but it did not help...

[keropi]

kickflash is disabled, and I use a normal 80GB ide HD + acard ... I was to furstrated with the sysinfo reboot thingie, so I did not really look if it fits in some way... it will be a tight fit though!

[keropi]

no the psu dimensions have not changed... maybe I did not look closer...

so I need an IDE-killer... I don't suppose I can buy one somewhere, right?  :lol:
thanks for the delay info, btw, I thought something was wrong. I wonder if I put the ide kill module on kickflash...

[keropi]

nice , gonna try all suggestions! thanx again!