ZorroII picassoII shows in early startup menu as working, but not on showconfig

[keropi]

I installed a picassoII 2MB card on the rbm zorroII busboard on my towered 1200... But while it shows fine on the early startup menu, it does not show up on showconfig, or p96checkboards util... even if I go to early startup menu, check the card (as shown on the shot) and without reboot I choose "boot with no startup seq" and run showconfig, only the blizzard1260 shows up.... wtf? :pissed:

http://img45.exs.cx/img45/5140/image2960gu.jpg

[keropi]

it is not the same prob....

[keropi]

ah, thanx for the help Tahoe! all is much more clear now...

[keropi]

can anyone provide real help with this one???
I use a COMMODORE (not escom/amigatech anymore) v1D4 ...

[keropi]

here is the update:

after removing the 1260 , and leaving the picassoII in, the boards get identified after the early startup menu! it show it, 2 village tronic devices, one with 128k and the other 2mb of mem.... but when I re-instert the 1260, only the blizzard gets identified after the early startup menu... WTF!

[keropi]

hey, it works Matt_H !!!!
is there any workaround? it sux to reboot...