Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: DF1 DF2 DF3 ... Bad on A2000?  (Read 13910 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline flip79Topic starter

  • Newbie
  • *
  • Join Date: Sep 2025
  • Posts: 3
  • Country: it
    • Show all replies
DF1 DF2 DF3 ... Bad on A2000?
« on: September 24, 2025, 03:55:40 PM »
Hi :)
My Amiga 2000 always shows these “ghost” drives on the Workbench (see attached photo). This happens even when no expansion cards are installed — just the bare A2000 booting from the single DF0: floppy drive.
Any idea what might be causing it?

Thank you very much for your help!
Logged
 

Offline flip79Topic starter

  • Newbie
  • *
  • Join Date: Sep 2025
  • Posts: 3
  • Country: it
    • Show all replies
Re: DF1 DF2 DF3 ... Bad on A2000?
« Reply #1 on: September 30, 2025, 12:32:58 AM »
Quote from: F0LLETT on September 29, 2025, 08:58:34 AM
Normally on happens, when there is an issue with one of the CIA chips.
You tried reseating them?

Hi, thank you for your help!
OK, I tried (I also cleaned them a little with isopropyl alcohol), but no changes. These BAD boys are still there :/
Logged
 

Offline flip79Topic starter

  • Newbie
  • *
  • Join Date: Sep 2025
  • Posts: 3
  • Country: it
    • Show all replies
Re: DF1 DF2 DF3 ... Bad on A2000?
« Reply #2 on: October 06, 2025, 08:08:37 PM »
Reseated all the socketed chips (apart the Fat Agnus aka Fat Lady because I don't have the correct extractor tool here with me) and swapped the CIAs.
Then I tried another floppy drive from my Amiga 600. It's the drive!
I've never seen a floppy drive that "generates" ghost DF* units, very strange  ::)
Logged
 
Pages: [1]   Go Up
« previous next »