Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Dataflyer 1200 question....  (Read 1081 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline corsavertTopic starter

  • Jr. Member
  • **
  • Join Date: Aug 2004
  • Posts: 96
    • Show all replies
Dataflyer 1200 question....
« on: November 26, 2007, 11:40:41 PM »
Installing Dataflyer 1200, driver installed and now formatting 550mg hd. Question - it's at "Writing RDB-Blocks".... how long should this take? It's been at it an hour already....
Logged
A1200/MB1230-50Mhz/128MB/80GB/3c589/Dataflyer SCSI+/OverdriveCD/SCSI CD/Diamondscan
 

Offline corsavertTopic starter

  • Jr. Member
  • **
  • Join Date: Aug 2004
  • Posts: 96
    • Show all replies
Re: Dataflyer 12000 question....
« Reply #1 on: November 27, 2007, 03:31:11 AM »
It's working!!! I had two problems....

Needed to BOOT from the Dataflyer install disk to run the partition & format... not just launch the utility from my own WB.

Once formatted, 3.1 couldn't access the 4gb (actually something like 4068mb) drive - too big I guess.

A 540mb drive then worked fine...
Logged
A1200/MB1230-50Mhz/128MB/80GB/3c589/Dataflyer SCSI+/OverdriveCD/SCSI CD/Diamondscan
 
Pages: [1]   Go Up
« previous next »