Hypercom 1...???

[_caddy_]

i bought one off ebay, and dont know which way it goes onto the clock port....can anyone help, its not like the one on amiga hardware either

http://i23.ebayimg.com/02/i/04/eb/d5/25_1_b.JPG


also my motherboard has the full clock header, unlike every other 1200 i've had, which has only had half

[_caddy_]

it wont boot the amiga, if its one way round,  but the other it boots fine, oh well, at least theres a 50% chance of getting it right first time, lol


but how do i know it works? does it have some diagnostics software? or somesuch.....to be honest it has pretty much no functionality for me, since i have braudband through my ethernet card, but i needed something to go over the clock port to stop some metal on the inside touching it if it slid.
the oher option was a 44 pin ide header, which was about 31 pence less expensive...mm ebay but i thought i might as well have something seful instead of nothing, right?...
 also does anyone know what the pinouts of the serial connector is, im thinking that i should change the 25 pin for a 9 pin one.....


time to get that damn modem back off my mate (pace56k external - i'm sure this'll work with amiga... though, never tried)

[_caddy_]

figired it out, cheers mate.
also took a 9 pin sub d with cablefrom a pc serial and checked to see wether the pins were compatable, its now got a 9pin adaptor in it instead of the 25 pin one

got the info on how it'd fit from HWB. according to that its should work



thanks for the info anyway