Welcome, Guest. Please login or register.

Author Topic: Amiga 4000T and the DPS TBC IV  (Read 4934 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline VmanJeffTopic starter

  • Newbie
  • *
  • Join Date: Aug 2025
  • Posts: 6
  • Country: us
  • Gender: Male
    • Show all replies
Amiga 4000T and the DPS TBC IV
« on: September 11, 2025, 11:09:45 PM »
Putting together my 4000T Toaster/Flyer again and things are working well but there is an issue…. The TBC IV I sourced did not arrive with the Din-9-M to Serial cable. (Attaches to the Amigas Serial port on the back and to the TBC’s round Din9 connector allowing control from the installed software) I’ve been searching the web and so far nothing. AliExpress has a couple listed but I’ve never ordered from them and who knows if the Pinot is correct. So I’m looking for either
A - someone who has one they are willing to part with in the US
B - someone who’s willing to continuity check theirs and tell me the Pinot so I can make my own
C - someone with knowledge of the proper way to install an internal cable to the 3 pin header on the TBC then to the A4000T motherboard if that is possible.
Also looking for an original mouse round plug extension for sale in the US. All I find are overseas vendors.
The photo attached is of the faceplate adaption I made for the zuzuSCSI and SD card extension connector. Works great! As does the Zulu. Except I’m having one heck of a time configuring the wi-fi 
 

Offline VmanJeffTopic starter

  • Newbie
  • *
  • Join Date: Aug 2025
  • Posts: 6
  • Country: us
  • Gender: Male
    • Show all replies
Re: Amiga 4000T and the DPS TBC IV
« Reply #1 on: September 12, 2025, 01:36:52 PM »
Thank you! I'll check with him.

I did find the pinout in the manual so I can make one if need be but other sources are always welcome