Try reseating the autoboot rom on the lower right hand corner of the GForce030. You might also give a gently push on any dip chips on the board you see to make sure they are seated firmly in their sockets. Sometimes the best method is to use a small screwdrive and gently pry up dip-style chips and then reseat them in their sockets thereby making better contact. Also, the 86-pin edge connector on the GForce is a bit on the short side; make sure it seats itself fully in the cpu slot. A2000s are notorious for the rather flimsy case; perhaps yours shifted in transit and therefore the cpu card doesn't seat fully. Worth a shot.
