If you have difficulties getting such a cable, you can make one yourself quite easily. you only have to connect 6 wires (Red, Green, Blue, Composite Sync and 2x ground), from the 23 pin connector to the 9 pin connector:
Ground: (pins 16-20) => (pins 1 & 2)
Red: 3 => 3
Green: 4 => 4
Blue: 5 => 5
Composite Sync 10 => 7
Though as the 23pin connector isn't available anymore, you can alter a 25 pin connector with a hacksaw or a dremel
I often see people referring to a 9pin dsub connector on their commodore monitors, but every single one of the dozens I've seen/used have a 6pin DIN connector.
Is that just a regional thing?
