Drawbridge

[SkulleateR]

Thanks, I only wish to write unprotected adf to disk. So insert adf file into df0 and then write to drawbridge drive via something like x-copy

Why would you do that ?

XCopy will not run on AmiBench, just use GoADF or TSGUI from Aminet to write back an ADF file to real disk. Works fine on AmiBench (tested with a Greaseweazle) 

If you really want to use XCopy, just make a Custom Setup with DF0 using ADF and DF1 using DrawBridge/Greaseweazle, then start the XCopy ADF on DF0 and write back any ADF by copy from DF0 to DF1 ...

[SkulleateR]

I just wish to write an adf to drawbridge (real disk) through Amibench.

Works fine, just do it 

//EDIT : Just did some more tests and it seems that the configuration using DF0 or DF1 as REAL FLOPPY DRIVE will not be saved correctly. After powering off and on the A600GS it´s all back to using ADF, maybe someone can look into that 

[SkulleateR]

Was that with the Drawbridge title or a custom system?

On AmiBench and in Custom Setup

[SkulleateR]

Are you sure you "SAVED" it rather then "USED" it ? Testing here the config appears to save correctly.

VERY sure, I made a quick video that shows the problem I have ...

https://youtu.be/miykFYmR918

[SkulleateR]

A fix will be forthcoming shortly.

Sweet 

Thanks