Looking for SCSI cable for connecting a Cyberstorm PPC to a Zulu SCSI RP2040

[Boing-ball]

I’m using a standard 68 pin with terminator connector on before the CSPPC and also one after the SCSI2SD. To connect a 50 pin to a 68 pin I am using 68 pin female to 50 Pin female adapter.
 Basically one of these

https://ebay.io/m/wF9HfU

I would consider LVD/SE termination on the cable so to keep your SCSI bus speeds. I don’t know what type of SCSI termination is used on the Zulu. Can only gather it’s a standard SCSI-II Active.

[Boing-ball]

Thank you.

So basically the cable I linked to should be fine:

https://www.amazon.de/-/en/InLine-29953A-Terminators-Devices-Terminator/dp/B000L0Y2A8/ref=sr_1_2?crid=2L0SGNAUYJXDO&dib=eyJ2IjoiMSJ9.Ygr3_u6yJ8CKOix3dz73RFuiVFiorBs2ifKer2B65modAmC1YHgb84R8vluG-m8-5aQKaYxtoJ8b58uFjVOh4aOJpXXqdeFlPZXhVtjo4S6kAzflVnA-CmKCEc7U-pcru5s-buOa3DMjTJfpVRcIIB-tZVkLgVaIsTp46e7g144CV3aMGEJ3tyPs60_U1RjzESYiblDAEnYPtsqTRGteo5IbxmBl7ZXzxkOw0T-5tbE.dJA5SMUBvuqDevd1hB1-4fekMklyTQnui49bXjzMQ64&dib_tag=se&keywords=68+pin+scsi+ribbon+cable+with+terminator&qid=1786258620&sprefix=68+pin+scsi+ribbon+cable+with+terminator%2Caps%2C109&sr=8-2

I would like one that is way shorter but not much to do about that.

And with this in stead as the converter from 68 to 50:

https://www.amazon.de/-/en/InLine%C2%AE-72929-Adapter-internal-50-pin/dp/B000PH8ZW8/ref=sr_1_10?crid=2L0SGNAUYJXDO&dib=eyJ2IjoiMSJ9.Ygr3_u6yJ8CKOix3dz73RFuiVFiorBs2ifKer2B65modAmC1YHgb84R8vluG-m8-5aQKaYxtoJ8b58uFjVOh4aOJpXXqdeFlPZXhVtjo4S6kAzflVnA-CmKCEc7U-pcru5s-buOa3DMjTJfpVRcIIB-tZVkLgVaIsTp46e7g144CV3aMGEJ3tyPs60_U1RjzESYiblDAEnYPtsqTRGteo5IbxmBl7ZXzxkOw0T-5tbE.dJA5SMUBvuqDevd1hB1-4fekMklyTQnui49bXjzMQ64&dib_tag=se&keywords=68+pin+scsi+ribbon+cable+with+terminator&qid=1786258468&sprefix=68+pin+scsi+ribbon+cable+with+terminator%2Caps%2C109&sr=8-10

Thanks for the link but customs makes it a no go to order from the UK.

Are you sure I need termination after the Zulu SCSI? Termination should be built into the Zulu SCSI.

And now we are at it. Does the the Cyberstorm have SCSI termination power? I think it does but not sure.

https://github.com/ZuluSCSI/ZuluSCSI-firmware/wiki/ZuluSCSI-Manual#using-installation

Yes to link 1.
If you are just planning on just 1 SCSI device then yes just use the inbuilt Termination of the Zulu.

Then yes this is the adapter you use for the Zulu scsi.

InLine® 72929 SCSI III Adapter internal 50-pin plug to 68 pin mini Sub D socket https://amzn.eu/d/03p1MDeW