Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A1200 CF2IDE / SD2IDE questions  (Read 370 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Boing-ball

Re: A1200 CF2IDE / SD2IDE questions
« on: March 03, 2026, 03:58:35 PM »
Simples.

Get a IDEtoSD and attach to the 44pin IDE internal. Remove the RF Modulator and use a SD extender so you can easily access the SD card for insertion and removal etc. via the RF shield hole.

Optional:

Buy a PCMCIA internet card and roadshow TCP/IP stack. Setup a SMB share to your PC to copy files.




« Last Edit: March 03, 2026, 04:00:25 PM by Boing-ball »
Logged
 

Offline Boing-ball

Re: A1200 CF2IDE / SD2IDE questions
« Reply #1 on: March 04, 2026, 11:53:02 AM »
The Amiga still follows standard IDE protocols. I.e 1st Master, 2nd Slave.
Logged
 

Offline Boing-ball

Re: A1200 CF2IDE / SD2IDE questions
« Reply #2 on: March 04, 2026, 03:48:24 PM »
Quote from: Rinusch on March 04, 2026, 03:24:40 PM
Check, but with only a CF2IDE adapter (which has only 1 connector), there is only 1 device the Amiga sees? So I assume no master/slave jumper required on the adapter then?

If the CF2IDE has a jumper. There still might be a conflict with another device on the line on the secondary. But it’s always #Amigalife

Logged
 
Pages: [1]   Go Up
« previous next »