A1200T with s-video converter problem

[Boing-ball]

So you want to use the PC Tuner as a Poor man’s Flickerfixer. I would double check the tuner card is actually a PAL card. Also stick with SuperTV as the mediator offering aint good. In SuperTV there are settings for the input in the software. Make sure it too is set correctly.

[Boing-ball]

Yes, i feel like that's the only reasonable way for my amiga 1200 tower without setting up multiple monitors.
I have tested this also with ati tv wonder, both cards are PAL.

I’m surprised you haven’t looked at getting an Individual Computers Indivision Scandoubler Flickerfixer and using a RATTE monitor switcher. This is what I use on my A1200T setup with a Voodoo4. Just put the SwitchControl software in C: and add the line in Startup-sequence to start SwitchControl on startup. Connect both the RTG and Indivision outputs through the RATTE.

[Boing-ball]

The Indivision scandoubler is expensive and i haven't heard of the ratte switcher and don't know where to get one

Ratte can be bought here

https://www.amibay.com/threads/ratte-auto-monitor-switches.2443255/page-3#post-2482765

Info on the RATTE

https://www.ikod.se/wp-content/uploads/2015/10/Ratte-InstallationGuide.pdf