Configuring CyberGraphx v4

[djkoelkast]

I happend to find the CyberGraphx v4 cd (from the previous owner) and installed it through the patch disk which came with it. It says: Update V4.1 (V42_r1).
I also installed gtlayout.library v47.1 (as there was a note in the cd box that the installed version was an old v43-version) and ofcourse installed the original Cybergraphics64 driver.

So now here I am having workbench still through the RGB port (I don't have my scandoubler cable yet so I'm working with an RGB > Scart cable on an old TV) and the colourful CyberGraphX logo on the VGA monitor.

In ScreenMode I can't select the CyberGraphic/CyberGraphx at all, just the RGB port modes.

Could anybody help me out on this? I'd like to have like an 800x600 or 1024x768 Workbench screen and do everything on the VGA monitor.

[djkoelkast]

I did several times but the mode never comes on ScreenMode, there I only find the normal RGB related modes like 640x256, 640x512 interlaced and so on.

There are only 6 modes listed and none of them are CyberGraphx modes.

Also on TEST mode it says "can't open test screen" while the CyberGraphX logo is shown on the VGA monitor...

[djkoelkast]

No, only 2 files listed:

CVision64 with icon
CyberVision with no icon

[djkoelkast]

I needed the latest update from here:

http://phase5.a1k.org/index.php?id=0

It was the only one that worked (found 2 other updates too) and it seems to work fine now, now find some modes for my monitor that it displays right ;-)

[djkoelkast]

well it just says "out of range" till now, but it works fine ;-)

[djkoelkast]

What the...? Bumping a topic within a few hours? I don't think that will give you a quicker answer...