Recently, I replaced an 18 gig IDE hard drive on my A4000 with an 17 gig UWSCSI. It's much faster than the old one, but I notice that the H.DISK light at the front of the 'miggy no longer lights when the disk is accessed.
:-? I've noticed the two prongs on the CyberStorm, next to SCSI controller. Are these for an LED?
:-? Also, the 'miggy now waits quite a while for the IDE bus to answer, before giving up and moving on. Is there a jumper that tells the A4000 to ignore its IDE bus?
Thanks in advance....
