Hi Every1,
I am in the middle of converting ADFs to disk on my Amiga. I have a small problem in doing so, I have a piece of software that I need the Amiga to run, it is called ADF 2 Disk. The problem is that the software is on the PC and not on the Amiga. How do I get the software onto the Amiga?
Specs78
Well Specs78, it depends on what type of Amiga you are using. If you are using an Amiga 600, 1200, 3000 or 4000, then CrossDos is probably your best bet, as suggested by the others. However if you're using an Amiga 500 without a hard drive then it becomes trickier. I wrote a tutorial for getting software from a PC to an Amiga about a year ago and posted it on my website, but that site no longer functions. If you like I can dig it out and put it on my new site for you, if indeed you are using a 500. It involves using a modified serial null-modem cable, all you really need are pin 2(Transmit Data), 3(Receive Data) and 7(Signal Ground), a small piece of code you'll need to write up in AmigaBasic and a small program called transdisk.
I wont go into too much detail here, but if this sounds like it could be a good solution for you let me know.
Xamiche
