Subway USB questions...

[amigakit]

Poseidon and the Subway USB work without installing MUI as documented in the printed manual that is supplied with Subway USB.  However, if you wish to use the Trident GUI program to control Poseidon, you will need to install MUI.  Here is the link:

http://aminet.net/package/util/libs/mui38usr

Here is the latest Posedion for Subway USB: http://www.platon42.de/poseidon.html

HDInstallTools is an alternative toolbox: http://aminet.net/package/disk/misc/hdinst

[amigakit]

You need to install FAT95 to read FAT formatted devices.  Poseidon installer asks you at the end if you wish to install the extras.  This includes FAT95

FAT95 file goes in the L drawer

USB CD drives need a CD FileSystem (in L drawer) and mount file (in DEVS/Dosdrivers drawer) to work.

[amigakit]

The first time you use Trident, you should add the Subway device under devices and press the Online button.  The light icon next to the Subway device driver should change from green to red.

Then in Trident again, scan for classes.  It will load the masstorage.class which is used for USB flash drives.

Save the settings.

[amigakit]

This is an instance where the EasyADF PCMCIA CF Transfer Kit is needed- you can transfer large amounts over to the Amiga 1200 easily and quickly.  EasyADF also uncompresses LHA files with a few clicks of the mouse which would be useful in this situation.

However, if you don't use Trident, then you will need to use the CLI commands for Subway USB, specifically these two commands:

C:AddUSBClasses
C:AddUSBHardware DEVS:USBHardware/subwayusb.device

[amigakit]

Yes we can do this for you.  

Our range of Technical Services is here:

http://amigakit.leamancomputing.com/catalog/index.php?cPath=53