ADAPCMCFL not reading CF cards on A1200

[amigakit]

Sorry to hear of your problem

Did you buy one of our tested cards with the adapter or are you using your own?

Please note that if you have a RAM expansion on an A1200 larger than 4MB it will block the PCMCIA port- stopping PCMCIA cards from working.  It may be worthwhile using the PrepCard utility to check that the PCMCIA card is connected and recognized by the A1200- don't use any of the functions of PrepCard- just use it to confirm successful connection.  Also don't worry if it PrepCard reports that the card is corrupt (this is normal message).

Also do you have the same results when booting from the ADAPCMCFL disk directly?

Here is a tutorial video:

http://www.youtube.com/watch?v=LNwVbbWpI4c

[amigakit]

Prepcard is in the Tools drawer in your Workbench partition.  Use it for simply checking a successful connection of the PCMCIA card with the A1200.  If there is no connection, then your PCMCIA port may be faulty or something blocking access.

[amigakit]

This sounds OK- I would imagine that the media cards are not Amiga compatible.  Do they appear as CF0:NDOS or CF0:? on the Workbench screen?