Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: A600 Floppy  (Read 2322 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amigakit

Re: A600 Floppy
« on: February 12, 2006, 02:04:40 PM »
The floppy drive is probably not faulty. It has probably moved and slightly misaligned with the disk slot.

If you open your a600, you may find that the floppy is working OK without the casing.

In this case try and realign it until the disks are ejecting OK.

The A600 can only take A1200 replacement floppy drives - not A500 as they are larger.

Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline amigakit

Re: A600 Floppy
« Reply #1 on: March 17, 2006, 07:45:40 PM »
If it is a Chinon mechanism, make sure the floppy cable is lying flat.  Position the floppy drive, lightly screw in the drive, make final adjustments then tighten all the screws.
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline amigakit

Re: A600 Floppy
« Reply #2 on: March 17, 2006, 07:58:43 PM »
I cant remember Panasonics being originally supplied with the A600.  They are longer drives so they may be a bit tricker to secure.
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 
Pages: [1]   Go Up
« previous next »