Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Problems with a A1200 2.5 Hard-disk  (Read 4947 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amigakit

Re: Problems with a A1200 2.5 Hard-disk
« on: January 27, 2006, 07:40:46 PM »
OS 3.1's filesystem can only address a maximum of 4GB, you will have to use another filesystem such as SmartFileSystem or upgrade to Amiga OS 3.5 or AmigaOS 3.9 but as you have a stock Amiga, the latter upgrades need extra memory and a CD drive too..
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline amigakit

Re: Problems with a A1200 2.5 Hard-disk
« Reply #1 on: January 27, 2006, 08:17:56 PM »
Make a partition of 300MB (DH0) then make another 1.7GB (DH1) then another 1.9GB (DH2) with HDToolbox.  Leave the rest of the Hard Disk blank.

Make DH0 the bootable drive.  Save changes and reboot.

Full Format each partition in turn: DH0, DH1 and DH2

!!Do Not Low Level Format!!
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline amigakit

Re: Problems with a A1200 2.5 Hard-disk
« Reply #2 on: January 27, 2006, 08:30:43 PM »
Low Level formatting an IDE drive can kill it sometimes, but some drives are OK.
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline amigakit

Re: Problems with a A1200 2.5 Hard-disk
« Reply #3 on: January 28, 2006, 03:58:43 PM »
Boot from the Install3.1 disk and not Workbench as the Install3.1 disk has the L:FastFileSystem on it.
Logged
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 
Pages: [1]   Go Up
« previous next »