The Keelog psu is rated at 4A 5v so should be enough for an accelerated Amiga according to icomp.de forum which rates that scenario as a 3.5A load with 2.5A a stock A1200. I was interested in the Keelog psu and have just ordered 2 for my A1200's whch both have ACA accelerators installed so hopefully that is not the problem for me also.
My main A1200 gives NDOS readings on the external fdd port so it's not working either. I have yet to find if this is a common issue with A1200's.
One thing that might cause no power to the external port is if you internal fdd has been previously replaced and whoever neglected to set the jumper to D0
Otherwise the 1010 could need checking for continuity with a meter.
