help! need goldengate 486slc drivers

[satiropan]

I can send you the .dms images of the Goldengate 386SX board, they may be the same as for the 486.
I have just bought this one, but I don't undestand I to have it working, I don't have any paper documentations and what's on disk is just to little (no tutorial or step by step guide.
Let me knoe
Ciao
S.

[satiropan]

Just following the issue, has anybody of you a Goldengate386SX on a A2000?
Mine gives me some problems.
My A2000 is rev 6.2, I have soldered the 10nF condenser between pin 12 and 14 of the 68000.
Before doing this, the setup and server setup programs saved the changes but won't exit (I was stuck with the setup screen until I rebooted).
With the condenser soldered, now I can exit setups and return to amiga screen, but digger and server won't start, with or without reboot.
If I boot with the GoldmineI disk, everything works OK, both digger and server, before and after the added condenser.
A friend here says I should upgrade to rev 6.3.
How, apart from changing the whole motherboard?
Any advice?
S.