Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Connecting a IDE CDrom drive to my A1200 & accelerator card  (Read 4323 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline motrucker

Re: Connecting a IDE CDrom drive to my A1200 & accelerator card
« on: March 18, 2010, 09:22:37 PM »
A shot at the obvious first - You need a file system for the CD-ROM (ASIM CDFS or another) once that is installed, you should be ready to go.
The CD-ROM will not show up on the boot screen however - until you put a CD in it - then it will appear.
Does that help at all?

3.1 would be a plus - but 3.0 should work...
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 

Offline motrucker

Re: Connecting a IDE CDrom drive to my A1200 & accelerator card
« Reply #1 on: March 19, 2010, 12:03:58 AM »
Since this card's RAM autoconfigs under OS 3.1, you may want to upgrade to the 3.1 ROMs. There are other advantages to the newer ROMs - money well spent IMHO
Logged
A2000 GVP 40MHz \'030, 21Mb RAM SD/FF, 2 floppies, internal CD-ROM drive, micromys v3 w/laser mouse
A1000 Microbotics Starboard II w/2Mb 1080, & external floppy (AIRdrive)
C-128 w/1571, 1750, & Final Cartridge III+
 
Pages: [1]   Go Up
« previous next »