Welcome, Guest. Please login or register.

Author Topic: Amiga upgrade after over 20 years  (Read 1491 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline jcrubinTopic starter

  • Newbie
  • *
  • Join Date: Mar 2018
  • Posts: 6
    • Show all replies
Amiga upgrade after over 20 years
« on: April 09, 2018, 02:32:04 PM »
After receiving my long awaited package from Individual computers I do an unboxing, preparation and installation of my new ACA500+ upgrade for my Amiga 500+.  This first means actually doing a downgrade first, removing the old acceleration and re-adding the original 68000.  I first make sure everything works after the downgrade before installation.

     Following a brief exploration of the menu I choose F7 which allows for a boot with all of the workbench disks mounted virtually so that a hard drive install can be accomplished.  So I add a CF card into the boot side and continue.

     I did not choose the correct CF card for this, nor did I choose the best partition strategy,  but this was a first go around, something I will correct in the next video.

     Ive learned that the ACA500+ never seems to be able to do a successful software reboot, always getting a green screen of death. This is not a major issue though.

     The boot to workbench was a success, and booted quickly. I then attempt to put the second CF card in just to see what happens and it is detected without issue, though only 4 gigs are shown in workbench.

     The next task is prefs, where id display mode I find that HIRES works rather nice through this RGB/HDMI conversion setup, so another win!  I then go through the rest of the prefs quickly for good measure.

    This is the point where I start with some basic software installations moving it from linux with the aux card starting with

lha.run and moving the lha68k to the workbench:c as lha.

     The second install was sysinfo.lha which i first extracted on the cf card first for testing.  This also allows me to see the tour of sysinfo showing this computer outperforming an amiga 1200 stock 68020. I then go through the rest of the tour of sysinfo.

     Satisfied with the structure, sysinfo is moved into the correct location. But i know that the partitions are wrong and I am bothered as I keep noticing that I only have 512k of chip ram. So its time to do some hardware troubleshooting. I wonder what happened to the fatter agnus?


https://www.youtube.com/watch?v=-V82h1vsrmQ