CatHerder wrote:
If you've repaired cut circuit trails before, or have fixed a pcb with a handy dandy cold trace pen in the past, I just shoved a GVP EGS REV 3 (Spectrum Graphics) video card on eBay for 99 cents. The description says it all...
Click to enlarge
A few years ago i was messing in a 133MHz pc and my screwdriver slipped, and i cut through like 20 lines next to the processor. I was able to fix it easily by rubbing off the lacquer in that area gently, and then i tinned my soldering iron, put a blob of solder on the end and just ran the iron back and forth quickly accross the cut traces. They patched up easily and none of the solder bridges fused with their neighbors.
