Welcome, Guest. Please login or register.

Author Topic: A500 IDE interface, building one.  (Read 2155 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline koaftder

  • Hero Member
  • *****
  • Join Date: Apr 2004
  • Posts: 2116
    • Show all replies
    • http://koft.net
Re: A500 IDE interface, building one.
« on: September 29, 2005, 08:57:30 PM »
Quote

AmigaFreak wrote:
Hello, I went to Aminet and downloaded the a500ide.lha package, and looked at the schematic for the board, or atleast thats what I think Im looking at. I dont understand it. Can someone explain what parts I need to buy to build it. or show me a more clear schematic?

Thanks,

Josh


Everything you need you  should be able to get at Jameco. If not theres digikey, mouser, arrow, etc.

On http://www.students.tut.fi/~leinone3/ide/

The pcb drawing clearly shows where each part goes. you could get some copper clad board and a tape kit and etch your own... It would be easier if you could get a prototyping board with that edge connector though, then you could wire wrap the thing together.
 

Offline koaftder

  • Hero Member
  • *****
  • Join Date: Apr 2004
  • Posts: 2116
    • Show all replies
    • http://koft.net
Re: A500 IDE interface, building one.
« Reply #1 on: September 29, 2005, 10:58:46 PM »
Would this IDE thing work on an a1000? I guess wb 1.3 would have a pretty nasty size restriction though.... It would be real nice to not have to keep all my stuff on floppies.