Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Impulse Firecracker 24 help  (Read 8531 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« on: April 20, 2020, 04:56:26 PM »
Is any of the installation disks for the card bootable and maybe also has a setup / test program on it?
Logged
 

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« Reply #1 on: April 20, 2020, 05:37:25 PM »
You could try ViewTek to show a test picture.
http://aminet.net/package/gfx/show/ViewTEK21

Maybe you have to readjust the colours on the card itself?
Logged
 

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« Reply #2 on: April 20, 2020, 06:58:35 PM »
amiga.resource.cx  mentioned something about internal genlock incompatibilities. Any chance the card gets such a signal from somewhere?
Logged
 

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« Reply #3 on: April 20, 2020, 07:59:28 PM »
Sounds like a fixable problem, still. You already took the card out for cleaning the contacts, didn't you? :)
Logged
 

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« Reply #4 on: April 20, 2020, 08:21:14 PM »
Yeah, that old software has certainly troubles with the 060 and the grafics, maybe memory size too.
Logged
 

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« Reply #5 on: April 21, 2020, 04:27:50 PM »
The ROMs on the card are in the right place? (just to be sure). Any socketed chips you could push?

At least the white screen is a stable valid signal, as reported by the monitor?
Logged
 

Offline TribbleSmasher

Re: Impulse Firecracker 24 help
« Reply #6 on: April 22, 2020, 05:29:05 AM »
Good luck!  :)
Logged
 
Pages: [1]   Go Up
« previous next »