Now I have another problem - the one I was removing the accelerator for - with the accelerator in I get messages that say it cannot find resource library 44, which interferes with a number of programs, including putting up the background jpeg. The accelorator is a Quickpak 4000T-060 rev4. I got it off ebay and have no manual for it. I am using GVP 060 libraries that I used on a
Trex. Any ideas? Does anyone have a manual for the Quickpak 060? Can't find one on goggle or anywhere. 3.9 works fine without the accelerator. Thanks, Jule
You need the appropriate 68060.library for the quickpack card...IIRC. Though, I've only seen that error before with OS3.5/9 when copying a hard disc with the os to another partition or device withotu using the "all" arguement to include all protection bits and datestamps the same as the original volume.
I've also had several A3000 systems (Desktops and Towers) come in with the same problem..someone was installing an 040 or an 060 and knocked a pin of the 030 into another pin. Later A3000D systems will fail to boot if the zorro busplane is removed. (Early models will work fine...it's an addition to the later ROMs to look for the card.)
I can try to find the library for you if you'd like..I'm almost positive that one of the two above is your solution. If you are trying to boot froma different disc or volume with the 060, then I can help you fix that as well.
Hope this helps.
Cheers,
//RC//
