Models of the 1084 come with either a SCART (Euro) connector, or with a Db9 connector on the back for Analogue RGB.
The 1084-SCART and the Amiga Db23 are shown here:
As can be seen from the SCART Diagram - the BLUE (+ GND), GREEN (+ GND), and RED (+ GND) are the lines to use for Analogue RGB.
On the Amiga side pins 3, 4, & 5 (+ each' GND) handle this mode. The Audio Lines from the Amiga's RCA-Outs join with the PICTURE cable through the collar on the SCART Plug. With a Db9 (RGB) connector on the 1084, those Audio Lines go to separate (RCA?)Audio Sockets.
(( NOTE- Pins
2 &
6 on the SCART should be labled
Right and
Left; not Mono! ))
( I've only had 1084 and Philips 8833 Monitors with the SCART input )
