Hi!
I have a A2000 rev.6.2 with a PPS 2000/040 accelerator with 32 MB ram and a CV64/3D and a GVP SCSI-controller and a AmigaNet card.
I installed the CV64/3D yesterday and has met some troubles. The Enforcer is installed and executed from the startup-sequence and the card is installed in the first slot nearest the cpuslot according to the manual.
But, after the system has booted up OS3.9 I get a screen and everything is fine. Using the CLI is OK, but here is my problem; opening a drawer makes first the mouse goes slowly and then the system freezes and then it reboots. What can be the problem? I didn't had any problems before installing the CV64/3D. And I only has 4 MB of ram in the ZorroII-limit except the CV64's 4 MB.
