Micronik Zorroboard A500 + Blizzard 2040

[lillPiP]

Hi!

I have a Micronik Zorroboard to the Amiga 500.
My problemis with the CPU.
When installing a Blizzard 2040 I won't get the computer to boot (It's recently been repaired).
But if  I remove the Blizzard 2040 the computer will boot and I can enter the Early Startup and here I can see both the Buddha IDE and my Picasso II+ cards.
Is there any jumpers on the Blizzard 2040 or the Micronikboard I have to change?

Kind regards
//Peter

[lillPiP]

Well, on a danish amiga-advert site  :-D

Nope I hasn't tested the Blizzard in a A2000 since I got it repaired from France 2 days ago! And it worked in his A2000.

[lillPiP]

@ Zipper

Do you still have the 68000-processor installed? I have tried with and without it but this didn't do the trick.
I have 3.1 rom installed. The Micronikboard should be OK, since it shows the other cards installed in the board when I enter the Early Startup menu.

[lillPiP]

For the moment I don't have the right keyboard here with me.
My A500+ is a rev.8A.
It really boots up fine without the Blizzard. (The BLizzard should be OK since it's newly repaired.)