Advice wanted on SD Card to IDE Interface with front-loading slot

[AndyFC]

I'm planning what expansions to add to my A1200 when I get a chance, and one idea I have is to add an SD Card slot, using an SD-to-IDE adapter. This plan is purely to use it to transfer files, rather than as a bootable drive.

If I add an SD card reader, I want to use one with a front-facing slot so I can mount it in a drive bay in a a tower and make a face plate for it. There are a few SD adapters available, like the one in the link below, with this configuration but is there anything I need to look for which will prevent them being compatible with an A1200 and 4-way IDE interface?

https://www.ebay.co.uk/itm/SD-SDHC-SDXC-MMC-Card-IDE-40Pin-3-5inch-Male-Adapter-I4A6-/282978961741

Thanks.

(updated the title to make it clear it's a question)

[AndyFC]

Thanks for the reply.

I plan to use Fat95 for the filesystem because file transfers would be from a PC. I know there's a Fat95 filesystem I'd have to install on the A1200.

Good to know that the adapters are likely compatible and thank you fot the advice on SD cards.

[AndyFC]

Thanks for the links.

I like the one with the bracket, I could convert it to a faceplate.

I know that SD cards can be a but finicky from having a Raspberry Pi.