Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Serial Cable for CD32 to A1200  (Read 1071 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AndyFC

Re: Serial Cable for CD32 to A1200
« on: September 03, 2015, 09:31:57 PM »
Hi, if you are handy with soldering, there is a project on aminet. http://aminet.net/package/docs/hard/CD32-Amiga11

If someone can confirm the copyright status of network cd2 and the boot floppy, I might be able to help you with a copy.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline AndyFC

Re: Serial Cable for CD32 to A1200
« Reply #1 on: September 04, 2015, 09:08:20 AM »
I just checked the .iff file and it shows a connector for the cd32's AUX port in the image.

I still have one of these cables but sadly no cd32 at the moment. I remember using it pre-CD ROM on my A1200 and it was slow and unstable.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 
Pages: [1]   Go Up
« previous next »