Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Mikomi 19 inch lcd - rgb on scart?  (Read 2014 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AndyFCTopic starter

Mikomi 19 inch lcd - rgb on scart?
« on: August 21, 2014, 06:09:53 PM »
I've just got a Mikomi lcdw19hd flat screen tv after my in-laws upgraded. There is little info online about this so does anyone know if the scart socket supports RGB or is it composite only? It has hdmi so it's still useful for my raspi.
Thanks.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline AndyFCTopic starter

Re: Mikomi 19 inch lcd - rgb on scart?
« Reply #1 on: August 21, 2014, 10:19:59 PM »
I've done some more reading on SCART. This tv doesn't auto switch to the SCART input when a source is turned on so I suspect it isn't a full RGB input. I'm not able to test the tv at the moment but when I can I'll try it with a DVD player and full SCART cable and look at image quality.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline AndyFCTopic starter

Re: Mikomi 19 inch lcd - rgb on scart?
« Reply #2 on: August 25, 2014, 05:13:17 PM »
I've done some testing as planned and the image from the DVD player is poor quality with a fully wired SCART lead (upscaling doesn't apply if using SCART, only HDMI). I didn;t even test with a disc - I just used the menus etc.

There is ghosting on the image so it's either composite or the RGB input on the TV is poor quality/broken. Ah well/ I was looking forward to a flat scren miggy but at least I have a proper Philips CM8833 II to use still.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline AndyFCTopic starter

Re: Mikomi 19 inch lcd - rgb on scart?
« Reply #3 on: September 05, 2014, 11:58:21 PM »
I plugged the Amiga into our living room flat screen (Toshiba 32 inch) and get a beautiful image. Tried all modes up to super hi res laced and its usable. At least I know the amiga and cable are good. I hope to do some videos this weekend and will put on YouTube soon.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 
Pages: [1]   Go Up
« previous next »