Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Install Workbench on CF card problems  (Read 11764 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline delshay

  • Hero Member
  • *****
  • Join Date: Mar 2004
  • Posts: 1009
    • Show all replies
Re: Install Workbench on CF card problems
« on: June 15, 2009, 10:38:33 PM »
no problems with sandisk CF IV did not change any settings.
« Last Edit: June 15, 2009, 10:40:54 PM by delshay »
Logged
-------------
power is nothing without control
 

Offline delshay

  • Hero Member
  • *****
  • Join Date: Mar 2004
  • Posts: 1009
    • Show all replies
Re: Install Workbench on CF card problems
« Reply #1 on: June 03, 2010, 03:10:29 PM »
Quote from: voyager;511792
They are indeed just wires but still you have DMA capable adapters and you have NON DMA adapters.

AFAIK DMA card’s need 5v on a pin to put it into DMA mode, so Adapters that support DMA have a floppy type connector on them.



err 5v is needed to power-up the unit as some adaptors do not supply 5v via the main connector. you will find the floppy type power point on 40 pin adaptor.
« Last Edit: June 03, 2010, 03:21:32 PM by delshay »
Logged
-------------
power is nothing without control
 
Pages: [1]   Go Up
« previous next »