Welcome, Guest. Please login or register.

Author Topic: WTB: Blizzard PPC accelerator  (Read 4089 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline delshay

  • Hero Member
  • *****
  • Join Date: Mar 2004
  • Posts: 1009
    • Show all replies
Re: WTB: Blizzard PPC accelerator
« on: December 09, 2005, 08:06:28 PM »
@doctorq


what blizzppc do u have & set-up.

NOTE: BlizzardPPC has two miner flaws..HEAT & getting enough POWER to the board..
-------------
power is nothing without control
 

Offline delshay

  • Hero Member
  • *****
  • Join Date: Mar 2004
  • Posts: 1009
    • Show all replies
Re: WTB: Blizzard PPC accelerator
« Reply #1 on: December 09, 2005, 08:30:27 PM »
@doctorq


i had the same problem,then found the scsi lead that goes blizzPPC does not alway make a connection..

i used switch cleaner..

also check break in the cable near the connector..
-------------
power is nothing without control
 

Offline delshay

  • Hero Member
  • *****
  • Join Date: Mar 2004
  • Posts: 1009
    • Show all replies
Re: WTB: Blizzard PPC accelerator
« Reply #2 on: December 09, 2005, 08:41:11 PM »
@doctorq


i also bent a couple of leg on the SCSI chip got bent when inserting the board..u may want to check this as well..

if it searching but cant find the unit this may also be a set-up problem..

look in HD-SET under blizzppc & see if its in the menu..
-------------
power is nothing without control
 

Offline delshay

  • Hero Member
  • *****
  • Join Date: Mar 2004
  • Posts: 1009
    • Show all replies
Re: WTB: Blizzard PPC accelerator
« Reply #3 on: December 09, 2005, 08:41:38 PM »
@doctorq


i also bent a couple of leg on the SCSI chip got bent when inserting the board..u may want to check this as well..

if it searching but cant find the unit this may also be a set-up problem..

look in HD-SET under blizzppc & see if the unit is in the menu..
-------------
power is nothing without control