can the cpc464 work with a 1084s?

[swift240]

Well the Amstrad RGB is this.

1:- RED
2:- GREEN
3:- BLUE
4:- SYNC
5:- GND
6:- LUM

I dont see why not.

The 1084S is this.
Numbered from the 1084S plug

TTL RGB                  

1:- GND                  
2:- GND                  
3:- RED                  
4:- GREEN                
5:- BLUE                
6:- INTENSITY            
7:- NOT USED            
8:- H.SYNC              
9:- V.SYNC              

Analoge RGB

1:- GND
2:- GND
3:- RED
4:- GREEN
5:- BLUE
6:- NOT USED
7:- COMP SYNC
8:- NOT USED
9:- NOT USED

BTW, this is the D-Plug fitting

You can get the info from here:-

http://www.hardwarebook.net/connector/av/c1084dd.html

Mike.


         

[swift240]

On the back of the 1084S monitor there is 2 buttons that go from TTL RGB to Analogue RGB
I used that monitor for a Commodore C16, Plus 4 and a Commodore 128 using the phono plugs on the back 2 was for Video input the other 2 was for Audio Stereo.

Switching between buttons on th eback would enable either the Video or the RGB 9 pin plug.
At one time via a switch box I would have a Plus4, C128, TV from a video and then into the D-Plug I would have either a Spectrum+2B or the Amiga 1200.
Now its in our bedroom acting as a TV from a Video player, and from a DVD player.

I am at present using a Philips 8833MkII for my Plus4, C128 and TV and the 9 pin D-plug for the Spectrum+2B

They both have sure earnt there keep....

Mike.

Not many people think of using a 1084S or a Philips 8833MkII for a TV via a Video player.