Welcome, Guest. Please login or register.

Author Topic: Going to replace VOB4xIDE with Powerflyer1200, how to move data?  (Read 1368 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline elal1862

  • Newbie
  • *
  • Join Date: Mar 2004
  • Posts: 6
    • Show all replies
    • http://www.elal.tk
Quote
but I have read that the Elbox needs to divide this space to 4GB partitions...
Well, read again... The elbox controller has an option to divide a disk into multiple 4G LUNs (yes, a division at scsi.device level, NOT at partition level!)
If enabled, the whole primary master drive would show up under scsi.device unit 0 and at unit 10 @ a 4G offset and at unit 20 @ 8G offset, etc. For ye olde softwaer, that can't look beyond 4G...
Even if the split option is enabled, you don't need to repartition the drive!

And: Don't EVER plug an amiga partitioned drive on a WinXP PC. It will see the RDB as a corrupted MBR, and will attempt to 'fix' that, destroying your partition data![/u]

RDB=Ridgid Disk Block, amiga's partition info. MBR=Master Boot Record, the Redmond imitation