Thanks Erol,
I've actually already seen that link on EAB and am currently using the 1.4 version patch.
Thanks for the info on CrossDos. I've been using it for many years with double density disks.
I should mention to everyone that I now have gotten ALL the PC High-Density floppy drives to be recognized by the PowerXL board as Amiga double density drives. Before some of the drives had not worked with this board (Panasonic, Toshiba). I connected them as DF1 and they work now, but again, only as DD drives.
So, still having the problem with it not recognizing any drives as HD.
I don't have another Amiga to test the drive on, but can it possibly be the rev4.4 motherboard?? Strange, as my DELL external HD drive works with this motherboard.
I'm not sure how the PowerXL HD floppy works, but to use a Commodore HD floppy drive in an A2000, you have to have the motherboard jumper for DF1 set to off, because the drive identification signal is provided by the drive. If you have it set to on, the motherboard provides this signal and the Amiga will always think that the disk in the drive is low density.
