FastATA 4000

[bigwall68]

Looking for quick advice.

Here is the setup:

A4000D
Channel 1:
8 Gig CF - 3.1 Workbench et al - works well
4 Gig CF - device recognized via sys info, but not able to be accessed

Channel 2:
CD Rom - device recognized via sys info, but not able to be accessed
Harddrive - accessible long enough for me to back up WB folder but now not able to be accessed

I did not receive a manual with the shipment.  Any advice on getting all 4 devices working is appreciated.  

-Craig

[bigwall68]

Yes on 3.1 4070.  I've installed the software from Elbox.  Jumpers are correct.  

Strange thing is that all four devices show up in SysInfo and in FastATAPrefs.

Could be residual from IDEFix97?  There is a ton of files in Dev.

[bigwall68]

I now have both CF working off one FastATA channel.  Still no CD or hard drive.  

Assuming not all CD readers work with A4000?  

Still confused about why all four devices are picked up in SysInfo (scsi), yet not with HDTools etc.  Any additional advice?