A3000D, Cloanto 3.X, bad floppy?

[A2K_Newb]

Hi.

Just wondering if there has been any resolution to this?

I have licensed 45.061 roms in my amiga 2000 that I purchased, that have been working fine, right up until I install fast ram expansion. As soon as I put a 4mb module into my accelerator, I get the NDOS error on my floppys.

I see that later versions of the rom, I think they are up to .64 or .65 now, have a floppy fix in the patch notes.

I've tried contacting cloanto through his website, and through amiga forever, and never got a response or acknowledgement.

If there was a fabulous new feature that I wanted, i wouldn't mind buying an updated rom, but this is a basic system breaking fault.

I wouldn't even mind if I had to use a patch file on boot, but my google-fu has failed me (plus I'm really not that familiar with amigas). I bumble my way through hardware/software setup guides, and fiddle until its completely broken or working.

Does any one have a rom image they can share for the latest? I can prove that i have licensed roms, if needs be. Otherwise, I guess I'll wipe the rom, and just put 3.1 kickstart on it.

Thanks, Joe

[A2K_Newb]

I have these same problems with the 3.X ROM in my A2000 with an A2630 + BigRAM2630. I have to remove the BigRAM to use the floppy. I need to buy a stock 3.1 ROM to replace the 3.X ROM. I believe it to be the cause.

What rev of the 3.x rom do you have? Mine was the 45.061 rev.

[A2K_Newb]

you may have to be a bit patient. they took 1 month to reply me.
but once they did, i was followed regulary by one person,  unitl the problem solved.

It's been over a month now..